Natural surfaces on phenolic resin high pressure laminates and be used and processed like normal HPL-panels and pe attached to a number of different surfaces and backgrounds. Typical woodworking materials such as chipboard, MDF and HDF are compatible. When glued on solid walls or metal, a multitude of pre-trials should be conducted. The usual principles and precautions apply, just like in working with any other engineered wood or laminate.
Do not press at a temperature higher than 60°C and use the separating paper enclosed between the hot press and the surface to protect the natural qualities of the organic materials.
The back of the HPL needs to be checked for leftover materials or oils after processing and has to be cleaned carefully accordingly. Cut off 2 cm along the edges before processing, as the density of the natural material deviates due to the production process